The armoured personnel carrier will be built from inside out. I will start with the interior, with the lower and upper part of the hull still being separated. After painting and weathering, the two halves will be glued together, and the construction of the vehicle will be continued.

I started already to work on the interior. The floor plates are from Aber, as well as most of the other brass parts visible. As on the lower inner parts on both sides of the hull imprints of the mould releases are quite visible, I added a thin sheet of brass on each side. The seats are scratchbuilt from brass, and the seat cushions are made from Magic Sculp.

The following picture provided the inspiration for this project:

It shows a SdKfz 250 armoured personnel carrier, with a camouflage pattern made from mud being applied. The vehicle that I will use is from Dragon, and has already been on my shelf for quite some time. Additionally, I will use some Aber PE sets.